CALL US TOLL FREE: 0800 ROLAND (0800 765 263)
INTERNATIONAL: +27 11 875 9300

MDX-540 Specifications

ADDITIONAL INFO

MDX-540 Specifications

Model MDX-540S MDX-540
Cuttable material Plastic, resin and light metal
XYZ-axis travels 500 mm (X) x 400 mm (Y) x 155 mm (Z) (19.6 (X) x 15.7 (Y) x 6.1 (Z) in.)
Distance from spindle nose to table Maximum 254 mm (10 in.)
Table size 550 mm (W) x 420 mm (D) (21.7 (W) x 16.5 (D) in.)
Loadable workpiece weight At acceleration of 0.2 G: maximum 12 kg (26 lb.), 0.1 G: 20 kg (44 lb.), 0.05 G: 20 kg (44 lb.)
XYZ-axis drive system AC servo motor, 80 W AC servo motor, 60 W
Operating speed Maximum 7.5 m/min (295 in./min)
Acceleration 0.2 G, 0.1 G, 0.05 G
Software resolution RML-1 mode: 0.01 mm (0.0004 in.), NC-code mode: 0.001 mm (0.00004 in.)
Mechanical resolution 0.001 mm (0.00004 in.)
Positioning accuracy ±0.1 mm/300 mm (±0.004 in./12 in.), under no-load conditions
Repeat accuracy ±0.02 mm (±0.0008 in.), under no-load conditions ±0.05 mm (±0.002 in.), under no-load conditions
Origin reproducibility (when the power is switched on/off) ±0.02 mm (±0.0008 in.) ±0.05 mm (±0.002 in.)
Spindle motor DC brushless motor, maximum 400 W
Spindle speed 400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering
Tool chuck Collet method, maximum tool diameter: 10 mm (0.4 in.)
Control command sets RML-1 and NC codes
Interface USB (compliant with Universal Serial Bus Specification Revision 1.1)
Power supply Voltage and frequency: AC 100 to 120 V/220 to 240 V ±10%, 50/60 Hz
Required power capacity: 7 A (100 to 120 V)/4 A (220 to 240 V)
Power consumption Approx. 700 W
Acoustic noise level During operation (no cutting): 65 dB (A) or less, During standby: 40 dB (A) or less (according to ISO 7779)
Dimensions 765 mm (W) x 955 mm (D) x 858 mm (H) [30.1 (W) x 37.6 (D) x 33.8 (H) in.] 745 mm (W) x 955 mm (D) x 858 mm (H) [29.3 (W) x 37.6 (D) x 33.8 (H) in.]
Weight 102 kg (225 lb.)
Operating temperature 5 to 40°C (41 to 104°F)
Operating humidity 35 to 80% (no condensation)
Included items Handy panel, power cord, tool sensor, sensor cable, nut, nut wrench, wrench, hexagonal wrenches, Roland Software CD-ROM, SRP Player CD-ROM, User's Manual, Roland Software Software Guide, SRP Player Installation and Setup Guide, and NC Code Reference Manual

Due to the current uncertainty in the exchange rate, product prises can not always be updated fast enough on this website. Please check all product prises with our sales people first.

Automatic Tool Changer (ZAT-540) MDX-540SA MDX-540A
XYZ-axis travels 400 mm (X) x 400 mm (Y) x 155 mm (Z) (15.7 (X) x 15.7 (Y) x 6.1 (Z) in.)
Number of tools housed 4
Maximum tool length 110 mm (4.3 in.)
Maximum tool diameter 10 mm (0.4 in.)
Maximum tool weight 350 g (0.77 lb.)
Tool-holder format Taper shank: JBS4002 15T 7/24 taper. Pull stud: JBS4002 15P (45°), special.
Tool-selection method Direct-changing type, fixed-address specification
Compatible compressed air 0.7 to 1.0 MPa, 50 L/min or higher
Spindle speed 400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering
Dimensions 765mm (W) x 955mm (D) x 858mm (H) [30.1 (W) x 37.6 (D) x 33.8 (H) in.] 745mm (W) x 955mm (D) x 858mm (H) [29.3 (W) x 37.6 (D) x 33.8 (H) in.]
Weight (including main unit and ATC) 109 kg (240 lb.)
Weight (ATC) 6.8 kg (15 lb.) (total weight including spindle, magazine, control box, etc.)
Included items Control box, magazine unit, ATC spindle, air cylinder, base plate, Z-origin sensor, spacer, cap screws, hexagonal wrenches, retaining bands, cable retainers, and user's manual

Due to the current uncertainty in the exchange rate, product prises can not always be updated fast enough on this website. Please check all product prises with our sales people first.

*When this unit is installed, the X-axis travels of the MDX-540 are as follows:

  • Standard table, no rotary axis unit: 400 mm (15.7 in.)
  • Standard table, rotary axis unit present: 270 mm (10.6 in.)/325 mm (12.7 in.) (with expanded X-axis travel)
  • T-slot table, no rotary axis unit: 400 mm (15.7 in.)
  • T-slot table, rotary axis unit present: 203 mm (7.9 in.)/258 mm (10.1 in.) (with expanded X-axis travel)
Rotary axis unit (ZCL-540) Specifications
Supported workpiece Resin (metal not supported)
Maximum angle of rotation ±21,474,836.47° (±59,652.3 turns)
Loadable workpiece size*1 Items within the range of a 90 mm (3.5 in.) in radius from the center of the rotary axis by 371 mm (14.6 in.) long. The actual cuttable range is smaller than this.
Workpiece thickness holdable by workpiece chuck 15 to 100 mm (0.6 to 3.9 in.)
Loadable workpiece weight Maximum 5 kg (11 lb.), maximum moment of inertia: 0.02 kgm2
Center drill used: Maximum 1.5 kg (3.3 lb.)
Control method Simultaneous 4-axis control
Feed rate Maximum 20 rpm
Software resolution RML-1 mode: 0.1°, NC-code mode: 0.01°
Mechanical resolution 0.002°
Static precision Backlash: 0.05°, Eccentricity: 0.3 mm (0.012 in.) or less
Dimensions 720 mm (W) x 100 mm (D) x 195 mm (H) [28.3 (W) x 3.9 (D) x 7.7 (H) in.]
Weight 6.5 kg (14.5 lb.) (total weight including drive unit, tailstock, base plates, etc.)
Included items Drive unit, tailstock, base plates, live center, center drill, Y-origin sensor, Z-origin sensor, spacer, origin-detection pin, cap screws, T-slot nuts, hexagonal wrenches, retaining band, and user's manual

*1 When the T-slot table is installed, the length is 297 mm (11.7 in.).
* When this unit is installed, the X-axis travels of the MDX-540 are as follows:

  • Standard table, no ATC unit: 285 mm (11.2 in.)/325 mm (12.7 in.) (with expanded X-axis travel)
  • Standard table, ATC unit present: 270 mm (10.6 in.)/325 mm (12.7 in.) (with expanded X-axis travel)
  • T-slot table, no ATC unit: 218 mm (8.5 in.)/258 mm (10.1 in.) (with expanded X-axis travel)
  • T-slot table, ATC unit present: 203 mm (7.9 in.)/258 mm (10.1 in.) (with expanded X-axis travel)
Software requirements Roland SRP Player
OS Windows® 2000/XP and Internet Explorer 6.0 or later
CPU Pentium® 4 recommended
RAM and hardware space 1GB (RAM) or more and 20MB (HDD) are recommended